Anti-corrosion metal primers, high-gloss enamel paints, zinc phosphate coatings, and heat-resistant finishes for gates, structural steel, and machinery.
Glory 1-Pack Etch Primer is a convenient single-component adhesion primer providing dependable chemical grip onto galvanized iron and aluminium without pot-life restrictions.
DuraCoat Two Pack Epoxy Enamel is a two component epoxy system highly resistant against abrasion, chemical attack and water penetration
Glory 2-Pack Epoxy Enamel is a high-performance chemical and corrosion resistant topcoat formulated for steel structures, machinery, and factory dado walls subject to chemical attack.
Glory 2-Pack Etching Primer is a polyvinyl butyral wash primer with phosphoric acid catalyst that chemically bites into galvanized steel and aluminium to ensure permanent topcoat adhesion.
Glory 2-Pack Hi-Build Epoxy Primer is a heavy-duty polyamide-cured epoxy primer providing maximum chemical resistance, high dry film build, and corrosion defense for steel and concrete.
Plascon 2K Epoxy Primer Base is an advanced matt epoxy coating from Kansai Plascon delivering exceptional durability, coverage of 8 - 10 m²/L, and long-lasting protection across Blast-Cleaned Structural Steel, Offshore Platforms.
A two component Polyurethane resin-based coating cured with isocyanate hardener. It is an industrial and architectural coating characterized by high gloss, quick drying, excellent gloss retention, UV resistance, flexibility, and chemical resistance. 2K polyurethane enamel provides superior appearanc
Plascon 2K Unicryl Acrylic Enamel is an advanced gloss polyurethane coating from Kansai Plascon delivering exceptional durability, coverage of 10 - 12 m²/L, and long-lasting protection across Fleet Vehicles, Commercial Trucks.
A water based acrylic coating, specifically formulated for use as a tennis court top coat dressing.
A single pack, synthetic resin-based coating with Aluminium pigment.
Sadolin Aluminox Aluminium Heat-Reflective Paint is an authoritative metallic lustre solvent-based coating from Sadolin Paints delivering exceptional durability, coverage of 12 - 14 m²/L, and long-lasting protection across Fuel Storage Tanks, Exposed Industrial Pipework.
Plascon Aluminox Aluminium Paint is an advanced metallic solvent-based coating from Kansai Plascon delivering exceptional durability, coverage of 14 - 16 m²/L, and long-lasting protection across Corrugated Iron Roofs, Fuel Storage Tanks.
Plascon Anticorrosive Metal Primer is an advanced matt solvent-based coating from Kansai Plascon delivering exceptional durability, coverage of 9 - 11 m²/L, and long-lasting protection across Coastal Steelwork, Marine Decking Framework.
Leafing aluminium protective paint providing heat reflection and weather protection on metallic surfaces exposed to sunlight and thermal radiation.
A tough, oil-modified alkyd high-gloss enamel providing weather-resistant shine and protection for architectural timber and metalwork.
A single pack, bitumen-based finish with a brownish silver colouring.
Traditional red oxide is merely a passive barrier primer with limited active anti-corrosive inhibitors. Zinc phosphate provides active chemical passivation, reacting with steel to form an insoluble protective phosphate layer that stops rust creep beneath the paint film.
For C4/C5 coastal environments like Mombasa, specify a 3-tier system: high-build zinc-rich epoxy primer (60-75 microns DFT), intermediate epoxy micaceous iron oxide (MIO) barrier (100-125 microns DFT), and an aliphatic polyurethane topcoat (50-60 microns DFT) resistant to UV fading.
Ideally, blast cleaning to ISO 8501-1 Sa 2.5 (near-white metal). Where abrasive blasting is impossible in field maintenance, perform thorough mechanical power tool cleaning to St 3 or hand tool cleaning to St 2, followed by degreasing with solvent to remove oil residues.
Not directly without a special primer. New galvanized zinc has an oily surface passivator that causes alkyd paints to saponify and peel. Clean with etching wash primer or specify a water-borne acrylic metal primer formulated specifically for galvanized steel.
Industrial high-build epoxy metal primers typically yield 6 to 9 square metres per litre at 75 microns dry film thickness (DFT), accounting for normal 20-25% application loss depending on steel profile and spray equipment.
We don't just supply paint — our application teams handle surface preparation, moisture testing, and multi-coat application with verified quality control across Kenya.
