Glory QAD Industrial Enamel is a quick-drying alkyd topcoat produced by Nasib Industrial Products Limited in Nairobi. It allows rapid handling and stacking of painted steel components while providing durable gloss and oil resistance. Sienna Paints supplies 1L, 4L, and 20L containers nationwide.
Glory QAD Industrial Enamel is a rapid-drying, high-gloss alkyd topcoat engineered for structural steel, machinery, trailers, and metal fabrication workshops.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Heavy-duty industrial anti-corrosive primer systems, red oxide primers, zinc chromate, and aliphatic polyurethane topcoats for steel structures, roofs, and gates.
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
In standard Kenyan ambient conditions (25°C), it dries to touch in 20 to 30 minutes, is recoatable in 2 to 3 hours, and achieves full handleable hardness within 6 hours.
Spray application using conventional suction/gravity guns or airless spray is the recommended method. Because it dries rapidly, brush application should be limited to small touch-ups to avoid brush drag.
Use genuine Glory Multi-Purpose Thinner or Glory Standard Thinner. Never thin with white spirit or mineral turpentine, as slow-drying solvents will cause wrinkling and destroy the rapid-drying mechanism.
Yes. It is widely used by commercial vehicle body builders and trailer fabricators across Kenya for its rapid handling and resistance to road grime and oils.
It covers approximately 11 to 13 square metres per litre per coat depending on spray transfer efficiency.
Sienna Paints Kenya supplies factory-fresh 1L, 4L, and 20L drums in standard industrial and custom tinted shades with fast delivery across Kenya.