Reliable cementitious waterproofing slurries, elastomeric acrylic membranes, and bitumen primers for flat roofs, wet areas, and water tanks.
Glory Acrylic Roof Coating is a 100% pure acrylic water-based roof paint providing superior UV resistance, elastomeric crack bridging, and direct adhesion to tiles and galvanized iron.
Solvent-borne bituminous damp-proofing solution designed to seal substructure concrete and foundation walls against rising groundwater.
Sadolin Aquaflex Elastic Waterproofing Membrane is an authoritative elastomeric satin water-based coating from Sadolin Paints delivering exceptional durability, coverage of 1.2 - 1.8 m²/L, and long-lasting protection across Concrete Flat Roofs, Gutters & Valleys.
Plascon Aquashield Waterproofing is an advanced matt water-based coating from Kansai Plascon delivering exceptional durability, coverage of 2 - 3 m²/L (multi-coat membrane), and long-lasting protection across Flat Concrete Roof Slabs, Parapet Gutters.
AquaTech 2C is a Two component, cementitious acrylic polymer based high performance water proofing coating. It offers seamless flexible crack bridging
AquaTech Aquafin F is waterproofing system for permanently solving the persistent rising damp in superstructure via the capillaries and exhibits itself as dampness in the lower portion of the super structure. This rising damp brings with it the dissolved salts and chemicals and the results are peeling of master points etc. in addition to the acceleration of rooting of woods. The rising damp is on the account of failure of damp proofing course or non existence of the same
AquaTech Crystalline IC is a state-of the art one component, penetrating crystalline material for waterproofing and protecting new or old structurally sound concrete. The AquaTech Crystalline IC nano-crystals will also grow in and along static hairline crack sealing them and preventing further incoming water
Duracoat AquaTech Rainshield is a single-component, elastomeric acrylic waterproofing paint designed for long-lasting protection of exterior surfaces. Once cured, it forms a tough, flexible, and durable coating that resists water penetration and UV radiation. Ideal for roofs, terraces, balconies, and walls.
AquaTech Saniflex is a liquid applied, ready to use, synthetic rubber-based polymer dispersion which dries to form a seamless elastomeric waterproofing membrane. The waterproof membrane provides a breathable yet waterproof elastomeric barrier with crack bridging properties
AquaTech TG is a cementitious, polymer dispersion based flexible protective coating and waterproof barrier. This product is two-component and resistant to water, moisture and abrasion. Its liquid mixing component is solvent free. AquaTech TG is a stand-alone product. It can be top or over coated with flexible or rigid mortars, stuccos or coatings for uniform appearance
AquaTech UM is an economical cementitious, polymer dispersion based highly flexible protective coating and waterproof barrier. This product is two-component and resistant to water, moisture and abrasion. Its liquid mixing component is solvent free.
Glory Bituminous Aluminium Paint is a dual-action solar reflective and waterproofing coating that shields bitumen membranes and metal roofs from intense tropical solar heat and UV degradation.
Sadolin Bituminous Aluminium Solar Reflective Roof Paint is an authoritative metallic silver solvent-based coating from Sadolin Paints delivering exceptional durability, coverage of 7 - 9 m²/L, and long-lasting protection across Bituminous Roofing Felt, Corrugated Iron Roofs.
A single pack, bitumen-based coating for lining water tanks
Pioneering German-engineered External Thermal Insulation Composite System (ETICS) utilizing high-density EPS insulation boards to slash building heating and cooling energy while sealing building envelopes against water ingress.
Euroclass A1 non-combustible exterior thermal and acoustic insulation composite system engineered with mineral wool slabs and breathable finishes for high-rise commercial towers and institutions across Kenya.
Unprotected bitumen melts, becomes brittle, and oxidizes rapidly under Kenya equatorial UV index 11+ and extreme day-night thermal cycling. It shrinks, detaches at seams, and traps ponding rainwater beneath the felt. 2K elastomeric cementitious slurries and UV-stable polyurethane membranes provide continuous seamless protection.
Yes. High-quality 2K cementitious waterproofing slurries are non-toxic, solvent-free, and safe for potable water containment once fully cured (minimum 7 days) and flushed according to manufacturer guidelines.
Construct a 50mm x 50mm triangular sand-cement mortar fillet (coving angle) at the internal 90-degree corner. Apply the first waterproofing coat, bed in a 200mm-wide non-woven alkali-resistant geotextile mesh across the fillet, and encapsulate with the second coat.
Positive-side waterproofing is applied to the exterior face of the basement wall directly facing the soil water pressure, preventing water from ever entering the concrete. Negative-side waterproofing is applied inside the room to counter incoming water pressure when exterior excavation is impossible.
Two coats applied perpendicularly (cross-hatch pattern) are standard, achieving a total dry film thickness of 1.5mm to 2.0mm (approx. 2.5 kg to 3.0 kg of mixed material per square metre).
We don't just supply paint — our application teams handle surface preparation, moisture testing, and multi-coat application with verified quality control across Kenya.
