Crown Silicone Water Repellent is an architectural and protective coating manufactured by Crown Paints. Formulated for a clear, silicone resin-in-solvent water repellent solution, it delivers reliable film durability and coverage across residential, commercial, and industrial facilities in Kenya.
A clear, silicone resin-in-solvent water repellent solution.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Elastomeric liquid-applied waterproofing membranes and polyurethane systems engineered for concrete flat roofs, terraces, and gutters in Kenya.
Potable water certified solvent-free epoxy linings and chemical-resistant polyurethane systems for underground concrete water reservoirs, sewage treatment sumps, and chemical containment.
Chemical damp proof course (DPC) silane injection, salt-resistant anti-efflorescence primers, and breathable polymer skim coats to permanently cure wet walls and peeling paint.
Thinner: White Spirit Dilution Ratio: Supplied ready for use. Dilution: Supplied ready for use
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Crown Silicone Water Repellent is designed for a clear, silicone resin-in-solvent water repellent solution. It is formulated by Crown Paints for commercial and residential applications requiring high durability.
Crown Silicone Water Repellent is suitable for application on properly prepared cement plaster, concrete, drywall, timber, or metal. All substrates must be structurally sound, dry, free of dust, grease, oil, and loose or flaking material prior to coating.
Use Thinner: White Spirit Dilution Ratio: Supplied ready for use. Dilution: Supplied ready for use. For brush or roller application, thin only up to 5–10% by volume if necessary. For spray application, adjust according to spray equipment manufacturer instructions (typically 10–15%). Do not over-thin.
Crown Silicone Water Repellent achieves touch dry in approximately 1–2 hours touch dry, and is ready for recoat after 4–6 hours under standard Kenyan ambient conditions (25°C, 50% RH). Drying will take longer in cold, damp, or poorly ventilated conditions.
The theoretical spreading rate is approximately 10–14 m² per litre per coat, depending on substrate porosity, texture, surface profile, and application loss. Two coats are generally recommended for optimal opacity and film build.
Yes, for fresh plaster, powdery masonry, bare metal, or unpainted timber, an appropriate primer or sealer must be applied first. Applying an appropriate primer ensures maximum adhesion, prevents suction, and prevents premature coating failure.
Crown Silicone Water Repellent is commercially supplied in 1L, 5L, 20L. Pack availability may vary based on tint base and batch production.
Paints Kenya supplies Crown Paints products on trade and project orders. Click 'Pata Bei / Request Quote' to add items to your quotation basket, or reach our commercial desk via WhatsApp. We issue itemized eTIMS-compliant proforma invoices with project delivery across Nairobi and countrywide transport.