Duracoat WoodTech Polyurethane Varnish Stain is a premium timber coating manufactured by Basco Products under the DuraCoat WoodTech range, engineered to protect and enhance architectural woodwork, furniture, and joinery. Available across Kenya through Paints Kenya with technical specification and delivery.
DuraCoat Polyurethane Varnish Stain is a single pack polyurethane finish primarily intended for internal use. It is also suitable as a priming coat prior to overcoating with Duracoat Polyurethane Wood Seal Clear.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
DuraCoat Polyurethane Varnish Stain is a single pack polyurethane finish primarily intended for internal use. It is also suitable as a priming coat prior to overcoating with Duracoat Polyurethane Wood Seal Clear.
This product is recommended for use on Hardwood & Softwood Timber, MDF & Plywood, Parquet & Wooden Floors, Power-Floated Concrete, Industrial Floor Screeds. It is especially suited for Suitable for wood flooring work, chip board, hard board, woodwork furniture & all interior timbersurfaces. For optimum performance and film build, 1 Coat are recommended.
Paints Kenya supplies genuine Duracoat WoodTech Polyurethane Varnish Stain with direct batch dispatch from Nairobi. We provide contractor pricing, Bill of Quantities (BOQ) cost estimation, eTIMS tax compliance, and turnkey supply-and-apply contracting services nationwide.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Clear polyurethane varnishes, wood stains, sanding sealers, and exterior yacht varnishes for hardwood doors, pergolas, timber ceilings, and parquet floors.
All surfaces to be painted must be clean, dry and free from dusts, grease or any loose material. All traces of Wax or Oil should be removed by power sanding particularly if wax had been used on the surface before. The moisture content should not exceed 12% prior to coating. Sand the surface using emery paper ,wipe of the dust and dirt before applying top coat
Ready to use/When applying by spray, thin to sprayable viscocityusing the Duracoat White Spirit
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Duracoat WoodTech Polyurethane Varnish Stain is formulated for application on Hardwood & Softwood Timber, MDF & Plywood, Parquet & Wooden Floors, Power-Floated Concrete, Industrial Floor Screeds. Manufacturer recommendations specifically highlight Suitable for wood flooring work, chip board, hard board, woodwork furniture & all interior timbersurfaces.
According to DuraCoat technical specifications, the theoretical spread rate is 16 - 18 Sq. Mt/Ltr. Actual coverage on site depends on surface porosity, plaster texture, substrate absorption, and application method.
Duracoat WoodTech Polyurethane Varnish Stain is touch-dry in approximately 2 - 4 Hours. Allow at least 24 Hours between successive coats under standard atmospheric conditions (25°C and 50% relative humidity).
All surfaces to be painted must be clean, dry and free from dusts, grease or any loose material. All traces of Wax or Oil should be removed by power sanding particularly if wax had been used on the surface before. The moisture content should not exceed 12% prior to coating.
Application can be carried out using Brush, Spray or Cloth Fabric. Manufacturer thinning guidance specifies: Ready to use/When applying by spray, thin to sprayable viscocityusing the Duracoat White Spirit.
You can purchase genuine Duracoat WoodTech Polyurethane Varnish Stain directly through Paints Kenya. We supply contractors, institutions, and residential clients with competitive trade pricing, computerized colour tinting, official KRA eTIMS invoices, and site delivery within Nairobi and nationwide.
