Duracoat WoodTech NC Sanding Sealer is a premium timber coating manufactured by Basco Products under the DuraCoat WoodTech range, engineered to protect and enhance architectural woodwork, furniture, and joinery. Available across Kenya through Paints Kenya with technical specification and delivery.
Duracoat NC Sanding Sealer is a high-quality wood furniture product used especially where a very high degree of gloss is desired on the lacquer topcoats. It is formulated to allow sanding with ease using fine adhesive paper.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Duracoat NC Sanding Sealer is a high-quality wood furniture product used especially where a very high degree of gloss is desired on the lacquer topcoats. It is formulated to allow sanding with ease using fine adhesive paper.
This product is recommended for use on Hardwood & Softwood Timber, MDF & Plywood, Parquet & Wooden Floors. It is especially suited for All types of wood. For optimum performance and film build, Brush Application - 1 CoatSpray Application - 3 Coats are recommended.
Paints Kenya supplies genuine Duracoat WoodTech NC Sanding Sealer with direct batch dispatch from Nairobi. We provide contractor pricing, Bill of Quantities (BOQ) cost estimation, eTIMS tax compliance, and turnkey supply-and-apply contracting services nationwide.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Clear polyurethane varnishes, wood stains, sanding sealers, and exterior yacht varnishes for hardwood doors, pergolas, timber ceilings, and parquet floors.
All surfaces to be painted must be clean, dry and free from dusts, grease or any loose material. Sand the surface lightly using emery paper ,wipe of the dust and dirt before applying top coat Dust off thoroughly using solvent-wet cloth to ensure dust free surface The moisture content should not exceed 12% prior to coating.
Dilute with Basco Standard Thinner
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Duracoat WoodTech NC Sanding Sealer is formulated for application on Hardwood & Softwood Timber, MDF & Plywood, Parquet & Wooden Floors. Manufacturer recommendations specifically highlight All types of wood.
According to DuraCoat technical specifications, the theoretical spread rate is 10 - 12 Sq. Mt/Ltr. Actual coverage on site depends on surface porosity, plaster texture, substrate absorption, and application method.
Duracoat WoodTech NC Sanding Sealer is touch-dry in approximately 10 Minutes. Allow at least 12 Hours between successive coats under standard atmospheric conditions (25°C and 50% relative humidity).
All surfaces to be painted must be clean, dry and free from dusts, grease or any loose material. Sand the surface lightly using emery paper ,wipe of the dust and dirt before applying top coat Dust off thoroughly using solvent-wet cloth to ensure dust free surface
Application can be carried out using Brush, Spray. Manufacturer thinning guidance specifies: Dilute with Basco Standard Thinner.
You can purchase genuine Duracoat WoodTech NC Sanding Sealer directly through Paints Kenya. We supply contractors, institutions, and residential clients with competitive trade pricing, computerized colour tinting, official KRA eTIMS invoices, and site delivery within Nairobi and nationwide.