Duracoat Floprime Sealer is a heavy-duty floor coating manufactured by Basco Products under the DuraCoat range, designed to provide chemical, mechanical, and abrasion resistance on commercial and industrial concrete floors. Sourced through Paints Kenya with supply and turnkey application options.
Duracoat Floprime Sealer is a Two Component solvent free Epoxy primer for cementitious substrate.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Duracoat Floprime Sealer is a Two Component solvent free Epoxy primer for cementitious substrate.
This product is recommended for use on Power-Floated Concrete, Industrial Floor Screeds. It is especially suited for Concrete Floors, Screeds. For optimum performance and film build, 1 Coat are recommended.
Paints Kenya supplies genuine Duracoat Floprime Sealer with direct batch dispatch from Nairobi. We provide contractor pricing, Bill of Quantities (BOQ) cost estimation, eTIMS tax compliance, and turnkey supply-and-apply contracting services nationwide.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Seamless heavy-duty self-smoothing epoxy and polyurethane screeds for industrial workshops, warehouses, commercial garages, and manufacturing plants.
Concrete surface to be laid must be flat and roughened and cured for 28 days. Remove laitance preferably by using Blast tracking machine or diamond grinding machine with vacuum sucking off the dust.
Mix 75% Duracoat Floprime Sealer with 25% hardener
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Duracoat Floprime Sealer is formulated for application on Power-Floated Concrete, Industrial Floor Screeds. Manufacturer recommendations specifically highlight Concrete Floors, Screeds.
According to DuraCoat technical specifications, the theoretical spread rate is 5 - 7 Sq. Mt/Ltr. Actual coverage on site depends on surface porosity, plaster texture, substrate absorption, and application method.
Duracoat Floprime Sealer is touch-dry in approximately 3 - 4 Hours. Allow at least 12 Hours - 24 Hours between successive coats under standard atmospheric conditions (25°C and 50% relative humidity).
Concrete surface to be laid must be flat and roughened and cured for 28 days. Remove laitance preferably by using Blast tracking machine or diamond grinding machine with vacuum sucking off the dust.
Application can be carried out using Brush, Roller, Spray. Manufacturer thinning guidance specifies: Mix 75% Duracoat Floprime Sealer with 25% hardener.
You can purchase genuine Duracoat Floprime Sealer directly through Paints Kenya. We supply contractors, institutions, and residential clients with competitive trade pricing, computerized colour tinting, official KRA eTIMS invoices, and site delivery within Nairobi and nationwide.