Duracoat 2 Pack Epoxy Floor Paint is a heavy-duty floor coating manufactured by Basco Products under the DuraCoat range, designed to provide chemical, mechanical, and abrasion resistance on commercial and industrial concrete floors. Sourced through Paints Kenya with supply and turnkey application options.
DuraCoat Two Pack Epoxy Floor is a two component epoxy system highly resistant against abrasion, chemical attack and water penetration. It offers maximum resistance to pedestrian and vehicular traffic. It is recommended for use on concrete floors in chemical plants, laboratories, hospitals, dairies, breweries, food factories, bottling plants, showrooms etc.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
DuraCoat Two Pack Epoxy Floor is a two component epoxy system highly resistant against abrasion, chemical attack and water penetration. It offers maximum resistance to pedestrian and vehicular traffic. It is recommended for use on concrete floors in chemical plants, laboratories, hospitals, dairies, breweries, food factories, bottling plants, showrooms etc.
This product is recommended for use on Power-Floated Concrete, Industrial Floor Screeds. It is especially suited for Concrete floors in chemical plants, laboratories, hospitals, diaries, breweries, food factories, bottling plans and showrooms. For optimum performance and film build, 2 - 3 Coats are recommended.
Paints Kenya supplies genuine Duracoat 2 Pack Epoxy Floor Paint with direct batch dispatch from Nairobi. We provide contractor pricing, Bill of Quantities (BOQ) cost estimation, eTIMS tax compliance, and turnkey supply-and-apply contracting services nationwide.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Seamless heavy-duty self-smoothing epoxy and polyurethane screeds for industrial workshops, warehouses, commercial garages, and manufacturing plants.
For new Unpainted Concrete surface, make sure the surface is free from dust, grease, oil and contains no water (moisture). For previously painted surfaces, Clean the surface and remove loose flakes and sand down to rough surface.
Mix with 3 Parts of Duracoat 2 Pack Epoxy Floor Paint with 1 Part of HardenerIf required dilute with Duracoat 2 pack epoxy thinner
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Duracoat 2 Pack Epoxy Floor Paint is formulated for application on Power-Floated Concrete, Industrial Floor Screeds. Manufacturer recommendations specifically highlight Concrete floors in chemical plants, laboratories, hospitals, diaries, breweries, food factories, bottling plans and showrooms.
According to DuraCoat technical specifications, the theoretical spread rate is 9 - 12 Sq. Mt/Ltr. Actual coverage on site depends on surface porosity, plaster texture, substrate absorption, and application method.
Duracoat 2 Pack Epoxy Floor Paint is touch-dry in approximately 3 - 4 Hours. Allow at least 24 Hours - 30 Hours between successive coats under standard atmospheric conditions (25°C and 50% relative humidity).
For new Unpainted Concrete surface, make sure the surface is free from dust, grease, oil and contains no water (moisture). For previously painted surfaces, Clean the surface and remove loose flakes and sand down to rough surface.
Application can be carried out using Brush, Roller, Spray. Manufacturer thinning guidance specifies: Mix with 3 Parts of Duracoat 2 Pack Epoxy Floor Paint with 1 Part of HardenerIf required dilute with Duracoat 2 pack epoxy thinner.
You can purchase genuine Duracoat 2 Pack Epoxy Floor Paint directly through Paints Kenya. We supply contractors, institutions, and residential clients with competitive trade pricing, computerized colour tinting, official KRA eTIMS invoices, and site delivery within Nairobi and nationwide.
