Crown Light Weight Body Filler is an architectural and protective coating manufactured by Crown Paints. Formulated for crown light weight body weight is a light body weight general purpose polyester putty with a significantly specific gravity lower than common standard body fillers, thereby combining easy application with compact surface and easy sanding, it delivers reliable film durability and coverage across residential, commercial, and industrial facilities in Kenya.
Crown Light weight Body Weight is a light body weight general purpose polyester putty with a significantly specific gravity lower than common standard body fillers, thereby combining easy application with compact surface and easy sanding.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Professional multi-stage automotive coating protocol covering polyester dent filling, anti-corrosive primer-surfacing, and high-gloss 2K acrylic polyurethane topcoating for passenger cars, commercial transport fleets, and steel truck chassis in Kenya.
Two-pack putty: DO NOT THIN. Mix with BPO paste hardener (100:2). Tool cleaner: Cellulose thinner.
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
It is a lightweight general-purpose two-component polyester putty with low specific gravity formulated for automotive panel beating, vehicle body repairs, and filling dents with minimal weight addition and easy sanding.
No. DO NOT THIN. Adding paint thinners, mineral turpentine, or solvents inhibits free-radical benzoyl peroxide polymerization and causes soft or gummy patches. Clean putty knives immediately with cellulose thinner.
Mix thoroughly on a clean mixing board with the supplied red benzoyl peroxide (BPO) paste hardener at approximately 100 parts filler to 2 parts hardener by weight. Mix until a uniform streak-free colour is achieved.
It sets rapidly and is ready for dry sanding with 80-grit to 180-grit abrasive paper within 20 to 30 minutes at 25°C. Avoid applying excessively thick single coats.
Bare metal must be degreased with Crown White Spirit, ground to bright clean steel (P80-grit), and completely free of rust, dust, and old paint before spreading filler.
Paints Kenya supplies Crown automotive fillers and refinish consumables to bodyshops and fleet workshops. Click 'Pata Bei / Request Quote' or contact our commercial desk on WhatsApp.