Sadolin Wet Wood Decking Stain is a satin finish water-based coating from Sadolin Paints formulated for Damp Hardwood Decking and Power-Washed Timber Decks with a coverage rate of 8 - 10 m²/L, and touch-dry in 2 - 3 Hours. Available through Paints Kenya for joinery, residential, commercial, and professional contracting projects across Kenya.
Sadolin Wet Wood Decking Stain is an authoritative satin water-based coating from Sadolin Paints delivering exceptional durability, coverage of 8 - 10 m²/L, and long-lasting protection across Damp Hardwood Decking, Power-Washed Timber Decks.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Sadolin Wet Wood Decking Stain is an authoritative satin finish water-based coating developed by Sadolin Paints specifically for application across Damp Hardwood Decking, Power-Washed Timber Decks, Outdoor Timber Balconies. Formulated under advanced Scandinavian timber and architectural coating standards backed by AkzoNobel, it delivers deep substrate penetration, exceptional opacity, and resilient film elasticity engineered to withstand East Africa's intense ultraviolet radiation, dramatic thermal cycling, and seasonal rainfall fluctuations. Available in Kenya through Paints Kenya, it provides architects, quantity surveyors, master joiners, and painting contractors with dependable batch consistency, verified KRA eTIMS fiscal compliance, and scheduled job-site logistics across Nairobi, Kiambu, Machakos, Naivasha, Mombasa, Nakuru, Kisumu, Eldoret, and regional development corridors.
Under typical Kenyan atmospheric conditions, Sadolin Wet Wood Decking Stain delivers a theoretical coverage of 8 - 10 m²/L per coat with a touch-dry time of 2 - 3 Hours and a recoat interval of 6 Hours. Thorough substrate preparation is essential: ensure all receiving surfaces are structurally sound, dry, free of oil, grease, mill scale, fungal growth, or loose friable matter. When treating timber, verify that wood moisture content does not exceed 15% and remove surface glaze by mechanical sanding along the natural grain. On mineral masonry or cement renders, neutralise fresh plaster alkalinity with a compatible primer prior to application to avoid film saponification and ensure lasting adhesion.
Paints Kenya acts as an independent trade supplier, sourcing specialist, and turnkey painting contractor, supplying the authentic Sadolin portfolio directly to residential joinery workshops, safari lodge construction sites, hospitality renovations, and commercial developments nationwide. Every contractor consignment is supported by comprehensive manufacturer Technical Data Sheets (TDS), material safety protocols, and batch verification. In addition to material supply, Paints Kenya fields experienced application crews who deliver professional surface profiling, moisture diagnostics, precision priming, and multi-coat spray or roller application strictly adhering to Sadolin architectural guidelines.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Clear polyurethane varnishes, wood stains, sanding sealers, and exterior yacht varnishes for hardwood doors, pergolas, timber ceilings, and parquet floors.
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Sadolin Wet Wood Decking Stain provides a theoretical coverage rate of 8 - 10 m²/L per coat. Actual practical coverage on Kenyan sites typically varies between 10% and 20% depending on substrate porosity, timber texture, surface profile, application technique (brush, roller, or airless spray), and environmental conditions such as midday wind and sun exposure.
Ensure receiving surfaces are completely dry, sound, clean, and free of oil, grease, wax, dust, and loose materials. On timber surfaces, ensure moisture content is below 15% and sand along the grain using 120-grit followed by 180-grit abrasive paper before dusting off. On masonry, cure fresh plaster for at least 28 days and apply an alkali-resistant primer. On structural metal, wire-brush or blast loose rust to Sa 2.5 standards and prime with an anti-corrosive primer.
Under standard Kenyan climatic conditions (approx. 25°C and 50% relative humidity), Sadolin Wet Wood Decking Stain achieves a touch-dry state in 2 - 3 Hours and can be safely overcoated after 6 Hours. Allow 24 Hours for full film cure. Low temperatures or high relative humidity (such as during coastal morning mists or highland rainy seasons) will extend these intervals.
Sadolin Wet Wood Decking Stain is available in genuine factory packaging options including 2.5L, 5L. Paints Kenya supplies all sizes from standard retail tins for small joinery repairs up to full contractor containers for major commercial and safari lodge developments.
Yes. Paints Kenya supplies genuine Sadolin products sourced through authorized manufacturing and distribution channels. We provide verified batch dispatch, KRA eTIMS-compliant fiscal tax invoices, and scheduled site delivery across Nairobi, Kiambu, Machakos, Naivasha, Mombasa, Nakuru, Kisumu, Eldoret, and upcountry project sites.
Yes. In addition to material supply, Paints Kenya provides turnkey painting and wood finishing contracting. Our trained teams carry out substrate moisture diagnostics, mechanical sanding, precision priming, and multi-coat application strictly in accordance with Sadolin Technical Data Sheets.
