Sadolin Paint Remover & Stripper is a clear gel finish solvent-based coating from Sadolin Paints formulated for Old Varnished Doors and Flaking Exterior Paint with a coverage rate of 2 - 4 m²/L (depending on paint layers), and touch-dry in Allows 15 - 30 minutes blister reaction. Available through Paints Kenya for joinery, residential, commercial, and professional contracting projects across Kenya.
Sadolin Paint Remover & Stripper is an authoritative clear gel solvent-based coating from Sadolin Paints delivering exceptional durability, coverage of 2 - 4 m²/L (depending on paint layers), and long-lasting protection across Old Varnished Doors, Flaking Exterior Paint.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Sadolin Paint Remover & Stripper is an authoritative clear gel finish solvent-based coating developed by Sadolin Paints specifically for application across Old Varnished Doors, Flaking Exterior Paint, Enamelled Steel Gates, Aged Lacquered Timber. Formulated under advanced Scandinavian timber and architectural coating standards backed by AkzoNobel, it delivers deep substrate penetration, exceptional opacity, and resilient film elasticity engineered to withstand East Africa's intense ultraviolet radiation, dramatic thermal cycling, and seasonal rainfall fluctuations. Available in Kenya through Paints Kenya, it provides architects, quantity surveyors, master joiners, and painting contractors with dependable batch consistency, verified KRA eTIMS fiscal compliance, and scheduled job-site logistics across Nairobi, Kiambu, Machakos, Naivasha, Mombasa, Nakuru, Kisumu, Eldoret, and regional development corridors.
Under typical Kenyan atmospheric conditions, Sadolin Paint Remover & Stripper delivers a theoretical coverage of 2 - 4 m²/L (depending on paint layers) per coat with a touch-dry time of Allows 15 - 30 minutes blister reaction and a recoat interval of Neutralize with water before repainting. Thorough substrate preparation is essential: ensure all receiving surfaces are structurally sound, dry, free of oil, grease, mill scale, fungal growth, or loose friable matter. When treating timber, verify that wood moisture content does not exceed 15% and remove surface glaze by mechanical sanding along the natural grain. On mineral masonry or cement renders, neutralise fresh plaster alkalinity with a compatible primer prior to application to avoid film saponification and ensure lasting adhesion.
Paints Kenya acts as an independent trade supplier, sourcing specialist, and turnkey painting contractor, supplying the authentic Sadolin portfolio directly to residential joinery workshops, safari lodge construction sites, hospitality renovations, and commercial developments nationwide. Every contractor consignment is supported by comprehensive manufacturer Technical Data Sheets (TDS), material safety protocols, and batch verification. In addition to material supply, Paints Kenya fields experienced application crews who deliver professional surface profiling, moisture diagnostics, precision priming, and multi-coat spray or roller application strictly adhering to Sadolin architectural guidelines.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Professional mechanical diamond grinding, scarifying, dust-free shot blasting, and chemical floor etching to prepare concrete for high-adhesion coatings.
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Sadolin Paint Remover & Stripper provides a theoretical coverage rate of 2 - 4 m²/L (depending on paint layers) per coat. Actual practical coverage on Kenyan sites typically varies between 10% and 20% depending on substrate porosity, timber texture, surface profile, application technique (brush, roller, or airless spray), and environmental conditions such as midday wind and sun exposure.
Ensure receiving surfaces are completely dry, sound, clean, and free of oil, grease, wax, dust, and loose materials. On timber surfaces, ensure moisture content is below 15% and sand along the grain using 120-grit followed by 180-grit abrasive paper before dusting off. On masonry, cure fresh plaster for at least 28 days and apply an alkali-resistant primer. On structural metal, wire-brush or blast loose rust to Sa 2.5 standards and prime with an anti-corrosive primer.
Under standard Kenyan climatic conditions (approx. 25°C and 50% relative humidity), Sadolin Paint Remover & Stripper achieves a touch-dry state in Allows 15 - 30 minutes blister reaction and can be safely overcoated after Neutralize with water before repainting. Allow Fast reaction gel for full film cure. Low temperatures or high relative humidity (such as during coastal morning mists or highland rainy seasons) will extend these intervals.
Sadolin Paint Remover & Stripper is available in genuine factory packaging options including 500ml, 1L, 4L. Paints Kenya supplies all sizes from standard retail tins for small joinery repairs up to full contractor containers for major commercial and safari lodge developments.
Yes. Paints Kenya supplies genuine Sadolin products sourced through authorized manufacturing and distribution channels. We provide verified batch dispatch, KRA eTIMS-compliant fiscal tax invoices, and scheduled site delivery across Nairobi, Kiambu, Machakos, Naivasha, Mombasa, Nakuru, Kisumu, Eldoret, and upcountry project sites.
Yes. In addition to material supply, Paints Kenya provides turnkey painting and wood finishing contracting. Our trained teams carry out substrate moisture diagnostics, mechanical sanding, precision priming, and multi-coat application strictly in accordance with Sadolin Technical Data Sheets.
