Duracoat Emulsion Undercoat is a matt finish architectural coating from DuraCoat (Basco Products Kenya Ltd) designed for Cement Plaster & Stucco and Concrete & Masonry with a coverage rate of 11 - 14 Sq. Mt/Ltr, and touch-dry in 20 - 30 Minutes. Available through Paints Kenya for residential, commercial, and professional painting projects across Kenya.
A premium quality smooth flowing primer that provides excellent adhesion and sealing characteristics for interior & exterior surfaces.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
A premium quality smooth flowing primer that provides excellent adhesion and sealing characteristics for interior & exterior surfaces.
This product is recommended for use on Cement Plaster & Stucco, Concrete & Masonry, Brickwork & Stone, Gypsum Boards, Ceilings & Plasterboard. It is especially suited for Soft boards, gypsum, hardboard and cement plaster.. For optimum performance and film build, 1 Coat are recommended.
Paints Kenya supplies genuine Duracoat Emulsion Undercoat with direct batch dispatch from Nairobi. We provide contractor pricing, Bill of Quantities (BOQ) cost estimation, eTIMS tax compliance, and turnkey supply-and-apply contracting services nationwide.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Professional mechanical diamond grinding, scarifying, dust-free shot blasting, and chemical floor etching to prepare concrete for high-adhesion coatings.
Surface should be free from any loose paint, dust and grease. Growths of fungus, algaes or moss should be removed by wire brushing and water Any surface cracks or holes should be raked out and filled with Duracoat Internal & External Skimcoat Treat surface for moulds and algaes if present with Duracoat Fungicidal Wash. In the case of highly alkaline fresh masonry, apply the Duracoat Alkali Resistant Primer to provide excellent adhesion and integrity.
Brush/Roller Application - Upto 20% with Clean WaterSpray application - More water may require
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Duracoat Emulsion Undercoat is formulated for application on Cement Plaster & Stucco, Concrete & Masonry, Brickwork & Stone, Gypsum Boards, Ceilings & Plasterboard. Manufacturer recommendations specifically highlight Soft boards, gypsum, hardboard and cement plaster..
According to DuraCoat technical specifications, the theoretical spread rate is 11 - 14 Sq. Mt/Ltr. Actual coverage on site depends on surface porosity, plaster texture, substrate absorption, and application method.
Duracoat Emulsion Undercoat is touch-dry in approximately 20 - 30 Minutes. Allow at least 3 Hours between successive coats under standard atmospheric conditions (25°C and 50% relative humidity).
Surface should be free from any loose paint, dust and grease. Growths of fungus, algaes or moss should be removed by wire brushing and water Any surface cracks or holes should be raked out and filled with Duracoat Internal & External Skimcoat
Application can be carried out using Brush, Roller or Spray. Manufacturer thinning guidance specifies: Brush/Roller Application - Upto 20% with Clean WaterSpray application - More water may require.
You can purchase genuine Duracoat Emulsion Undercoat directly through Paints Kenya. We supply contractors, institutions, and residential clients with competitive trade pricing, computerized colour tinting, official KRA eTIMS invoices, and site delivery within Nairobi and nationwide.