Duracoat Clearsil is a protective finish architectural coating from DuraCoat (Basco Products Kenya Ltd) designed for Cement Plaster & Stucco and Concrete & Masonry with a coverage rate of 6 - 10 Sq. Mt/Ltr, and touch-dry in 10 - 15 Minutes. Available through Paints Kenya for residential, commercial, and professional painting projects across Kenya.
Duracoat clearsil is an excellent water repellent agent for many absorbent mineral substrates, such as bricks, sand-lime brick, natural sandstone and mineral plasters. Duracoat Clearsil reduces the capillary absorption of the building which it has penetrated, but does not clog pores or capillaries. There is therefore little or no impairment of the building material's ability to "breathe".
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Duracoat clearsil is an excellent water repellent agent for many absorbent mineral substrates, such as bricks, sand-lime brick, natural sandstone and mineral plasters. Duracoat Clearsil reduces the capillary absorption of the building which it has penetrated, but does not clog pores or capillaries. There is therefore little or no impairment of the building material's ability to "breathe".
This product is recommended for use on Cement Plaster & Stucco, Concrete & Masonry, Brickwork & Stone. It is especially suited for Bricks, sand-lime brick, natural sandstone and mineral plasters.. For optimum performance and film build, 2 Coats are recommended.
Paints Kenya supplies genuine Duracoat Clearsil with direct batch dispatch from Nairobi. We provide contractor pricing, Bill of Quantities (BOQ) cost estimation, eTIMS tax compliance, and turnkey supply-and-apply contracting services nationwide.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Professional mechanical diamond grinding, scarifying, dust-free shot blasting, and chemical floor etching to prepare concrete for high-adhesion coatings.
Surface should be free from any loose paint, dust and grease. Growths of fungus, algaes or moss should be removed by wire brushing and water Any surface cracks or holes should be raked out and filled with Duracoat Internal & External Skimcoat Treat surface for moulds and algaes if present with Duracoat Fungicidal Wash. Stir thoroughly before and during use.Brush two “wet on wet” coats to ensure complete coverage
Do not dilute
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Duracoat Clearsil is formulated for application on Cement Plaster & Stucco, Concrete & Masonry, Brickwork & Stone. Manufacturer recommendations specifically highlight Bricks, sand-lime brick, natural sandstone and mineral plasters..
According to DuraCoat technical specifications, the theoretical spread rate is 6 - 10 Sq. Mt/Ltr. Actual coverage on site depends on surface porosity, plaster texture, substrate absorption, and application method.
Duracoat Clearsil is touch-dry in approximately 10 - 15 Minutes. Allow at least 4 Hour between successive coats under standard atmospheric conditions (25°C and 50% relative humidity).
Surface should be free from any loose paint, dust and grease. Growths of fungus, algaes or moss should be removed by wire brushing and water Any surface cracks or holes should be raked out and filled with Duracoat Internal & External Skimcoat
Application can be carried out using Brush, Roller, Spray. Manufacturer thinning guidance specifies: Do not dilute.
You can purchase genuine Duracoat Clearsil directly through Paints Kenya. We supply contractors, institutions, and residential clients with competitive trade pricing, computerized colour tinting, official KRA eTIMS invoices, and site delivery within Nairobi and nationwide.