Sadolin Road Marking Paint White (Reflective) is a matt white finish solvent-based coating from Sadolin Paints formulated for Asphalt Road Surfaces and Concrete Highways with a coverage rate of 3 - 4 m²/L (heavy film build for road lines), and touch-dry in 15 - 20 Minutes (Traffic ready in 30 mins). Available through Paints Kenya for joinery, residential, commercial, and professional contracting projects across Kenya.
Sadolin Road Marking Paint White (Reflective) is an authoritative matt white solvent-based coating from Sadolin Paints delivering exceptional durability, coverage of 3 - 4 m²/L (heavy film build for road lines), and long-lasting protection across Asphalt Road Surfaces, Concrete Highways.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Sadolin Road Marking Paint White (Reflective) is an authoritative matt white finish solvent-based coating developed by Sadolin Paints specifically for application across Asphalt Road Surfaces, Concrete Highways, Parking Bay Demarcation, Warehouse Traffic Aisles. Formulated under advanced Scandinavian timber and architectural coating standards backed by AkzoNobel, it delivers deep substrate penetration, exceptional opacity, and resilient film elasticity engineered to withstand East Africa's intense ultraviolet radiation, dramatic thermal cycling, and seasonal rainfall fluctuations. Available in Kenya through Paints Kenya, it provides architects, quantity surveyors, master joiners, and painting contractors with dependable batch consistency, verified KRA eTIMS fiscal compliance, and scheduled job-site logistics across Nairobi, Kiambu, Machakos, Naivasha, Mombasa, Nakuru, Kisumu, Eldoret, and regional development corridors.
Under typical Kenyan atmospheric conditions, Sadolin Road Marking Paint White (Reflective) delivers a theoretical coverage of 3 - 4 m²/L (heavy film build for road lines) per coat with a touch-dry time of 15 - 20 Minutes (Traffic ready in 30 mins) and a recoat interval of 1 - 2 Hours. Thorough substrate preparation is essential: ensure all receiving surfaces are structurally sound, dry, free of oil, grease, mill scale, fungal growth, or loose friable matter. When treating timber, verify that wood moisture content does not exceed 15% and remove surface glaze by mechanical sanding along the natural grain. On mineral masonry or cement renders, neutralise fresh plaster alkalinity with a compatible primer prior to application to avoid film saponification and ensure lasting adhesion.
Paints Kenya acts as an independent trade supplier, sourcing specialist, and turnkey painting contractor, supplying the authentic Sadolin portfolio directly to residential joinery workshops, safari lodge construction sites, hospitality renovations, and commercial developments nationwide. Every contractor consignment is supported by comprehensive manufacturer Technical Data Sheets (TDS), material safety protocols, and batch verification. In addition to material supply, Paints Kenya fields experienced application crews who deliver professional surface profiling, moisture diagnostics, precision priming, and multi-coat spray or roller application strictly adhering to Sadolin architectural guidelines.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
High-durability solvent-based road marking paints, reflective thermoplastic hot-melt compounds, and reflective glass beads for highways, factory floors, and mall parking lots.
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Sadolin Road Marking Paint White (Reflective) provides a theoretical coverage rate of 3 - 4 m²/L (heavy film build for road lines) per coat. Actual practical coverage on Kenyan sites typically varies between 10% and 20% depending on substrate porosity, timber texture, surface profile, application technique (brush, roller, or airless spray), and environmental conditions such as midday wind and sun exposure.
Ensure receiving surfaces are completely dry, sound, clean, and free of oil, grease, wax, dust, and loose materials. On timber surfaces, ensure moisture content is below 15% and sand along the grain using 120-grit followed by 180-grit abrasive paper before dusting off. On masonry, cure fresh plaster for at least 28 days and apply an alkali-resistant primer. On structural metal, wire-brush or blast loose rust to Sa 2.5 standards and prime with an anti-corrosive primer.
Under standard Kenyan climatic conditions (approx. 25°C and 50% relative humidity), Sadolin Road Marking Paint White (Reflective) achieves a touch-dry state in 15 - 20 Minutes (Traffic ready in 30 mins) and can be safely overcoated after 1 - 2 Hours. Allow 2 Hours for full film cure. Low temperatures or high relative humidity (such as during coastal morning mists or highland rainy seasons) will extend these intervals.
Sadolin Road Marking Paint White (Reflective) is available in genuine factory packaging options including 4L, 20L. Paints Kenya supplies all sizes from standard retail tins for small joinery repairs up to full contractor containers for major commercial and safari lodge developments.
Yes. Paints Kenya supplies genuine Sadolin products sourced through authorized manufacturing and distribution channels. We provide verified batch dispatch, KRA eTIMS-compliant fiscal tax invoices, and scheduled site delivery across Nairobi, Kiambu, Machakos, Naivasha, Mombasa, Nakuru, Kisumu, Eldoret, and upcountry project sites.
Yes. In addition to material supply, Paints Kenya provides turnkey painting and wood finishing contracting. Our trained teams carry out substrate moisture diagnostics, mechanical sanding, precision priming, and multi-coat application strictly in accordance with Sadolin Technical Data Sheets.
