SanDeco Atracto is a silk finish architectural coating from DuraCoat (Basco Products Kenya Ltd) designed for Cement Plaster & Stucco and Concrete & Masonry with a coverage rate of 8.0 - 12.5 m2 / L, and touch-dry in 4 - 5 Hours. Available through Paints Kenya for residential, commercial, and professional painting projects across Kenya.
ATRACTO is an acrylic emulsion-based decorative coating containing metallic pigments with a silky, gold and silver mother-of-pearl finish. ATRACTO TOUCH is a silicone-added, erasable silk-matte texture.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
ATRACTO is an acrylic emulsion-based decorative coating containing metallic pigments with a silky, gold and silver mother-of-pearl finish. ATRACTO TOUCH is a silicone-added, erasable silk-matte texture.
This product is recommended for use on Cement Plaster & Stucco, Concrete & Masonry, Brickwork & Stone, Hardwood & Softwood Timber, MDF & Plywood, Parquet & Wooden Floors, Structural Steel & Iron, Galvanized Sheet Metal, Mild Steel Railings & Gates, Power-Floated Concrete, Industrial Floor Screeds. It is especially suited for It is used on wall, plaster, gross concrete and wooden surfaces in the interior of buildings with the appropriate lining after floor preparation.. For optimum performance and film build, 2 Coats are recommended.
Paints Kenya supplies genuine SanDeco Atracto with direct batch dispatch from Nairobi. We provide contractor pricing, Bill of Quantities (BOQ) cost estimation, eTIMS tax compliance, and turnkey supply-and-apply contracting services nationwide.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
High-opacity washable silk, satin, and matt architectural emulsion painting for residential homes, corporate offices, and institutions.
Surface should be free from any loose paint, dust and grease. Growths of fungus, algaes or moss should be removed by wire brushing and water Any surface cracks or holes should be raked out and filled with Duracoat Internal & External Skimcoat Treat surface for moulds and algaes if present with Duracoat Fungicidal Wash. In the case of highly alkaline fresh masonry, apply the Duracoat Alkali Resistant Primer to provide excellent adhesion and integrity.
Ready to use
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
SanDeco Atracto is formulated for application on Cement Plaster & Stucco, Concrete & Masonry, Brickwork & Stone, Hardwood & Softwood Timber, MDF & Plywood, Parquet & Wooden Floors, Structural Steel & Iron, Galvanized Sheet Metal, Mild Steel Railings & Gates, Power-Floated Concrete, Industrial Floor Screeds. Manufacturer recommendations specifically highlight It is used on wall, plaster, gross concrete and wooden surfaces in the interior of buildings with the appropriate lining after floor preparation..
According to DuraCoat technical specifications, the theoretical spread rate is 8.0 - 12.5 m2 / L. Actual coverage on site depends on surface porosity, plaster texture, substrate absorption, and application method.
SanDeco Atracto is touch-dry in approximately 4 - 5 Hours. Allow at least 24 Hours between successive coats under standard atmospheric conditions (25°C and 50% relative humidity).
Surface should be free from any loose paint, dust and grease. Growths of fungus, algaes or moss should be removed by wire brushing and water Any surface cracks or holes should be raked out and filled with Duracoat Internal & External Skimcoat
Application can be carried out using Brush, Trowel. Manufacturer thinning guidance specifies: Ready to use.
You can purchase genuine SanDeco Atracto directly through Paints Kenya. We supply contractors, institutions, and residential clients with competitive trade pricing, computerized colour tinting, official KRA eTIMS invoices, and site delivery within Nairobi and nationwide.