Glory Autocryl 2K Epoxy HB Primer is an automotive two-component epoxy primer produced by Nasib Industrial Products Limited in Nairobi. It provides direct-to-metal adhesion and impermeable moisture barrier defense for vehicle restoration and commercial fleets. Sienna Paints supplies 1L and 4L kits across Kenya.
Glory Autocryl 2K Epoxy High Build (HB) Primer is an automotive bare-metal anti-corrosion primer offering maximum moisture impermeability and adhesion for vehicle restorations.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Professional multi-stage automotive coating protocol covering polyester dent filling, anti-corrosive primer-surfacing, and high-gloss 2K acrylic polyurethane topcoating for passenger cars, commercial transport fleets, and steel truck chassis in Kenya.
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Yes. Applying polyester body filler over cured, scuffed 2K epoxy primer is the gold standard in automotive restoration, as the epoxy permanently seals the bare metal beneath the filler from moisture and rust.
Yes. When thinned 20% to 25% with Glory Epoxy Thinner, it can be applied as a single non-sanding wet-on-wet sealer coat and topcoated with Autocryl 2K after 30 to 45 minutes of flash-off.
Use ONLY genuine Glory Epoxy Thinner. Do not use standard thinners or mineral turpentine.
Allow 6 to 8 hours at 25°C before dry sanding with 320 to 400-grit paper.
It covers approximately 7 to 9 square metres per litre per coat at 70 microns dry film thickness.
Sienna Paints Kenya supplies 1L and 4L kits with prompt delivery to vehicle workshops across Kenya.