Wood & Timber Staining, Varnishing & Polyurethane Finishing
Clear polyurethane varnishes, wood stains, sanding sealers, and exterior yacht varnishes for hardwood doors, pergolas, timber ceilings, and parquet floors.
Glory Premium Grade Contact Adhesive is an industrial polychloroprene contact cement produced by Nasib Industrial Products Limited in Nairobi. It bonds Formica countertops, leather, rubber, and automotive trims with immediate grab and high heat resistance. Sienna Paints supplies 0.5L, 1L, 4L, and 20L containers nationwide.
Glory Premium Grade Contact Adhesive is an industrial-strength polychloroprene contact cement delivering instant grab, high heat resistance, and permanent bonding for Formica, leather, and rubber.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Clear polyurethane varnishes, wood stains, sanding sealers, and exterior yacht varnishes for hardwood doors, pergolas, timber ceilings, and parquet floors.
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Spread a thin, uniform coat onto both the laminate back and the wooden substrate using a serrated notched spreader. Allow the adhesive to flash off for 10 to 20 minutes until it is tacky but dry to the touch (does not transfer to knuckles), then position carefully and press firmly from center outwards with a heavy roller.
No. Contact adhesive bonds instantly on contact with immense initial grab. Always use wooden separator dowels or kraft paper sheets to position the laminate accurately before pressing surfaces together.
In Kenya's hot sun, automotive headliners and kitchen countertops can reach high temperatures. Inferior adhesives soften and cause Formica or fabric to lift at the edges. Glory Premium Grade withstands temperatures up to 75°C without creeping.
One litre covers approximately 3 to 5 square metres of completed bonded joint (accounting for coating both mating faces).
Clean fresh adhesive spills and tools immediately with a rag dampened with Glory Standard Thinner. Do not use water or white spirit.
Sienna Paints stocks 0.5L, 1L, 4L, and 20L tins with prompt delivery to carpentry shops, upholsterers, and site projects across Kenya.