Glory Parquet Flooring Glue is an elastomeric timber floor adhesive produced by Nasib Industrial Products Limited in Nairobi. It absorbs seasonal wood expansion to prevent parquet blocks from popping loose over concrete screeds. Sienna Paints supplies 5kg and 25kg pails across Kenya.
Glory Parquet Flooring Glue is a heavy-duty, permanently flexible flooring adhesive engineered for bonding hardwood parquet blocks and strip flooring to concrete screeds.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Clear polyurethane varnishes, wood stains, sanding sealers, and exterior yacht varnishes for hardwood doors, pergolas, timber ceilings, and parquet floors.
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Concrete subfloors must be fully cured for at least 28 days with internal moisture content below 4%. Laying wooden parquet over damp concrete will cause timber warping and adhesive failure.
Spread evenly onto the subfloor using a 4mm to 6mm square-notched trowel. Only spread as much adhesive as can be covered with parquet blocks within 20 to 30 minutes (before the adhesive skins over).
Allow at least 48 to 72 hours for the glue to achieve full bond strength and for the timber to acclimate before machine sanding and varnishing.
Consumption ranges from 1.0 to 1.5 kg per square metre depending on screed flatness and trowel notch depth. A 25kg bucket covers approximately 18 to 25 square metres.
Yes. Scrape away old brittle bitumen or glue from the screed and the back of the loose block, apply a liberal layer of Glory Parquet Glue, press firmly into place, and weigh down with a heavy object for 24 hours.
Sienna Paints Kenya supplies 5kg and 25kg pails directly to flooring installers and contractors nationwide.