Durabond 100 Tile Adhesive is a high-strength construction bonding product from DuraCoat/Basco Products formulated for reliable adhesion on building surfaces. Sourced on request across Kenya by Paints Kenya with project volume discounts.
Durabond 100 is a cementitious, non-shrink general purpose tile adhesive. It contains highest grades of cement, fillers, polymers and chemical additives to give it unique properties.
Add to your cart to receive an itemized quotation with project volume discounts and scheduled site delivery across Kenya.
Durabond 100 is a cementitious, non-shrink general purpose tile adhesive. It contains highest grades of cement, fillers, polymers and chemical additives to give it unique properties.
This product is recommended for use on Cement Plaster & Stucco, Concrete & Masonry, Brickwork & Stone, Corrugated Iron Sheets, Concrete Roof Tiles, Fibre Cement & Asbestos, Power-Floated Concrete, Industrial Floor Screeds, Ceramic Wall & Floor Tiles, Porcelain & Granite Slabs, PVC Floor Tiles. It is especially suited for Wall and floor tiles, Marble and Terrazzo Tiles & Mosaic. For optimum performance and film build, 1 Coat are recommended.
Paints Kenya supplies genuine Durabond 100 Tile Adhesive with direct batch dispatch from Nairobi. We provide contractor pricing, Bill of Quantities (BOQ) cost estimation, eTIMS tax compliance, and turnkey supply-and-apply contracting services nationwide.
Approved surface preparation standards, methodology statements, and target sector deployment protocols.
Professional mechanical diamond grinding, scarifying, dust-free shot blasting, and chemical floor etching to prepare concrete for high-adhesion coatings.
The substrate must be cured, mechanically strong, free from loose particles, grease, oils, paint, wax and sufficiently dry. All surfaces must as flat as possible.
5 - 6 Liters of Clean Water
Our application crews handle diamond grinding, surface moisture testing, and multi-coat installation adhering strictly to manufacturer technical data sheets.
Durabond 100 Tile Adhesive is formulated for application on Cement Plaster & Stucco, Concrete & Masonry, Brickwork & Stone, Corrugated Iron Sheets, Concrete Roof Tiles, Fibre Cement & Asbestos, Power-Floated Concrete, Industrial Floor Screeds, Ceramic Wall & Floor Tiles, Porcelain & Granite Slabs, PVC Floor Tiles. Manufacturer recommendations specifically highlight Wall and floor tiles, Marble and Terrazzo Tiles & Mosaic.
According to DuraCoat technical specifications, the theoretical spread rate is 3 - 4 Sq. Mt/Kg. Actual coverage on site depends on surface porosity, plaster texture, substrate absorption, and application method.
Durabond 100 Tile Adhesive is touch-dry in approximately 6 Hours. Allow sufficient curing between coats before handling.
The substrate must be cured, mechanically strong, free from loose particles, grease, oils, paint, wax and sufficiently dry. All surfaces must as flat as possible.
Application can be carried out using Spatula, Trowel. Manufacturer thinning guidance specifies: 5 - 6 Liters of Clean Water.
You can purchase genuine Durabond 100 Tile Adhesive directly through Paints Kenya. We supply contractors, institutions, and residential clients with competitive trade pricing, computerized colour tinting, official KRA eTIMS invoices, and site delivery within Nairobi and nationwide.